Model 3300TA​​​

Trace Oxygen Analyzer​​​​



 Description

The 3300 series of low cost, microprocessor-based instrument are specially designed to satisfy industry’s need for a simple yet highly reliable process analyzer. These units offer excellent accuracy, ease of use, high reliability, low maintenance and a variety of standard features usually found on more expensive instruments.


Multiple Configurations

This series is a cost-effective solution to many process applications. With three different sensing technologies to choose from and multiple design configurations, a customized unit for a given application is easily secured. Sensing ranges are varied based on the oxygen sensor and technology used. All units come with an auto-ranging capability and a 0-25% calibration range. Fully adjustable high or low concentration alarms provide the versatility to satisfy nearly any requirement.


Outputs for Data Transmission

A standard 0-10 VDC output provides range identification, while the oxygen concentration is output through 4-20 mADC negative ground and 0-10 VDC negative ground signals. An optional unidirectional RS-232 serial interface can be​incorporated to relay information to a host computer for remote monitoring, making information and analysis results as close as a personal computer.


Sensing Technologies

The 3300 Series is available with three sensing technologies, each with their own benefit.

Micro-fuel Cell - 3300T, 3300P

  • Disposable, no maintenance sensor design

  • Specific to oxygen

  • Linear from 0-100% O2

  • Absolute zero (no O2, no output); single point calibration only

  • Unaffected by hydrocarbons, H2 or CO2

  • Easy to handle, inexpensive and easy to replace

  • Can apply to ppb, ppm and percent ranges

Zirconium Oxide - 3300Z

  • Quick response time

  • Long life / service in clean, non-corrosive streams

  • No shelf life concerns

  • Can be applied on a wide variety of applications 

Paramagnetic - 3300M

  • Long life / service in clean gas streams

  • High accuracy

  • Can be applied on corrosive, high temperature a


Additional Advantages

  • Customer selectable ranges

  • Auto ranging capabilities

  • Fully adjustable high or low alarms set-points with corresponding relay contacts

  • Digital interface allows monitoring from a remote station

  • Sensor failure alarm​​


 Features

  • Principle: Oxygen specific* electrochemical transducer Micro-fuel Cell Class B-2C

  • Ranges: Two ranges, with auto-ranging capability; field configurable between 0-10 ppm and10,000 ppm O2

  • Calibration range: 0-25% O2

  • Signal outputs:

    • For oxygen concentration: 4-20 mADC negative ground and 0-10 VDC signals 

    • For range identification: 0-10 VDC signal

  • Alarm outputs:

    • Two user configurable setpoints with corresponding relay contacts

  • Display: 4 digit LED

  • Power requirements: Universal AC power supply 100-240 VAC, 47-63 Hz; 10 watts maximum​


 Specifications

Ranges

​Two ranges with auto-ranging capability​; field configurable between 0-10 ppm and 0-10,000 ppm

​Calibration Range

​0 to 25% O2

​Range ID

​0-10 VDC

​Display

​4 digit LED

​Accuracy

​± 2% FS at constant temperature
± 5% FS over operating temperature (once temperature equilibrium has been reached)
Higher accuracy is available for special configurations

​Response Time

​90% in less than 45 seconds at 77°F (25°C)

​Temperature

​32° to 122°F (0° to 50°C); special temperature ranges available

​Output

​For oxygen concentrations: 4-20 mADC negative ground and 0-10 VDC signals
For range identification: 0-10 VDC signal

​Alarm

​Two fully adjustable high or low alarms; one sensor fail relay (all alarms are fail-safe)

​Power

​Universal AC 85-265 VAC, 47-63 Hz

​Sampling System

​Various options available. Please contact factory

​Connections

​1/4 inch or 6 mm - user specified

​Oxygen Sensor

Micro-Fuel Cell


 Downloads

Title​

​File Size​

Model 3300 Series Brochure

​1.​84MB

​Model 3300TA Manual​

​​579​KB


​​