|
|
|
|
| |
AN-300 Handheld Nitrogen Analyzer
I have an AN300 that displays 100% all the time...What may be the problem? This is an indication that the O2 sensor is dead or not connected to the analyzer, likely resulting from a non-functioning sensor or disconnected/broken cable. If the sensor is properly connected to its cable, replace the sensor, part number C77484-N33. Top of page |
||||||
|
Document Control & Training (password) e-mail us: ask_tai@teledyne.com Copyright © 2010 Teledyne Technologies Incorporated. All rights reserved. Teledyne Analytical Instruments • 16830 Chestnut St • City of Industry, CA 91748 • USA |
