The "R" series of sensors are used by most automotive emission equipment manufacturers worldwide.​

The "R" series of sensors are used by most automotive emission equipment manufacturers worldwide.​

The "R" series of sensors are used by most automotive emission equipment manufacturers worldwide.​

R-17MED

*The FDA requires that the end user is a medical facility by registration or license​

R-22MED

*The FDA requires that the end user is a medical facility by registration or license​

T-1

*The FDA requires that the end user is a medical facility by registration or license​

T-7

*The FDA requires that the end user is a medical facility by registration or license​

UFO-130-2

*The FDA requires that the end user is a medical facility by registration or license​

A-2C​​

​Used for trace Oxygen (O2) measurements in Carbon Dioxide (CO2) containing backgrounds (0.1-100% CO2). CO2 mustbe present​

A-2CXL

Specially qualified A2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm​

A-5​​

Intermittent or continuous monitoring of percent Oxygen (O2) in gas mixtures containing 0-100% Carbon Dioxide (CO2). 90% response time is 45 seconds​

B1

General purpose percent oxygen analysis where fast response is desired (90% in less than 7 seconds)​

​B-1C

General purpose percent oxygen analysis where fast response is desired (90% in less than 7 seconds)​

​B-2C​​

General purpose trace Oxygen (O2) analysis for use in inert gas and hydrocarbon streams. Low range limit is 0-10 ppm.​

​B-2CXL​

Specially qualified B-2C sensor to operate in XL model analyzers. Low range limit is 0-1 ppm.​

​B-3

Percent Oxygen (O2) analysis, best compromise between long life and fast response​

E​-2​​

Long life cell for use is the model 3290 (for use in unattended air liquefaction nitrogen skids)​

Special patented construction provides rapid recovery, during initial cell installation, to low ppm levels by reducing the recovery period from several hours to just minutes.​

Instatrace-CO2 - Special patented construction provides rapid recovery, during initial cell installation, to low ppm levels by reducing the recovery period from several hours to just minutes​​​

Instatrace-XL - Special patented construction provides rapid recovery, during initial cell installation, to low ppm levels by reducing the recovery period from several hours to just minutes.​​

​L-2C​

Used for general purpose trace oxygen analysis in the 3000T analyzer series​